EG STARTS Arcade Buttons 1 Player DIY Kit Joystick 5V LED Arcade Button for Arcade Stick PC Games Mame Raspberry pi
$25.99
Available in stock
Description
Price: $25.99
(as of Sep 27, 2024 07:00:28 UTC – Details)
Product Description
Product Description
1.Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!
2.The Joystick is a square 8 way professional joystick!
3.The buttons are Chrome 5V LED Illuminated push buttons with build-in Blue switch inside.
4.The buttons default as lighted all the time.
5.Joystick hole diameter: 24mm, large button hole diameter: 28-30mm
Package Included
1x Zero Delay LED USB Encoder
1x USB Cable
1x 5Pin wires for Joystick
10x 3Pin wires for LED Push Buttons
2x 5V LED 30mm Ring-Fixing LED White Push Buttons (1 Player + 2x Coin)
8x 5V LED 30mm Ring-Fixing LED Push Buttons (2x Red, 2x Yellow, 2x Blue, 2x Green)
1x 5Pin Square 8 way joystick
1x Install Description
Tips for installation
1. Plese read our user manual before starting your diy actions.
2. It’s very important! Connect Joystick’s 5Pin cable to the 5Pin slot that opposite the USB-B terminal. A lot people connect the joystick to the wrong 5Pin slot.
3. There is no need separate the button’s functions when you connect wire to push buttons and encoder board exept you want add ” Auto-Fire”, ” Tubro”, “Clear” & ” Mode” Functions. All the fight button functions can be set in MAME or RetroPie. “Auto-Fire”, “Tubro”,”Clear” & “Mode” Functions have its own slot on the encoder board.
4. For Professional Players. We suggest your change all the buttons and joysticks into SANWA Brand or SEIMITSU Brand.
Tips for New User:
1. The item need work with MAME emulator. So before your build your own project, please download one to work with the parts.
2. If you use this kit to build your own Raspberry Pi Retropie Projects. Please search the steps before your DIY.
Wiring method
Optimize the buttons interface modePlug and play for easy plugging and unpluggingSolve the wiring problem that plagues 90% of players.Let the player DIY become simple from now on.
Arcade Joystick
Can replace the different ball
It’s hight quality 5Pin 8-ways joystick model. The service life reaches 1 million clicks.New interface mode. Reject the wrong interface.
Joystick bottom
Applicable to the wooden shell and iron shell machine,The return of flexible, more wear-resistant; Iron base parallel cone; square gate.
Specification map
All the silver conduction point, contact sensitive; within the iron bar for the stainless steel;2.0 thickness of the electrolytic plate; dust washers; ball detachable, can replace the different ball;
Arcade LED Push Buttons
New Version LED Buttons
Individually independent stickers.Buttons can be opened separately to add brand LOGO. Create your own style.Each button has 3Pin Included switch and LED lights interfaces.
LED Lights
High quality materialsHigh temperature resistant plastic partsBody and translucent HD button coverRotating design
Specification map
Comes with lighting effects, can be used for wood console, metal panels, with the use of various types of animation gamePlucked gold-plated, gold-plated contacts, micro-sound, long life, test life of up to 10 million timesUse voltage: 5V
USB Controllers
USB Encoder
The USB Cable: 87InchThe 5Pin Cable: 9.8 InchThe Buttons Cable: 9.8 InchUSB encoder imported SMD components. Work more smoothly. Longer life expectancy. Lower energy consumption.
Wiring method
Optimize the Buttons interface mode.Plug and play for easy plugging and unplugging.Solve the wiring problem that plagues 80% of players.Let the player DIY become simple from now on
PCB Board
USB Print TerminalsK1-K12 Push Buttons Terminals5Pin Joystick Terminals2Pin Joystick TerminalsAuto, Turbo, Clecet, Mode Terminals6 and 6-1 is Output 5V Power Terminals
Quality: Excellent Control USB Encoder. High Quality 8 way joystick. LED Buttons Good lighting effects.
Fonction: DC 5V Arcade Illuminated Pushbutton, 8 ways Joystick Use Microswitch with gilded contact leg, excellent electronic performance, long life, reliability tested to 1,000,000 cycles!
Hole Size: Joystick – 24mm. Large Buttons-30mm
Package: 175 x 95 x 115mm. Each button and joystick are individually packaged and 1 year warranty.
Support: Perfect LED Kit for Windows Arcade Games PC Games DIY Project Arcade Raspberry Pi for RetroPie system MAME
Customers say
Customers like the functionality, ease of setup, and value of the video game controller. They mention the lights work great, the buttons are responsive, and it’s easy to wire. Some also say it’s worth it for all the wiring and buttons. Additionally, customers are satisfied with the kit quality and feel. However, some customers have different opinions on the buttons.
AI-generated from the text of customer reviews
Manuel Medina –
Light up buttons are fun!
These buttons are so easy to install and look wonderful lighted up in use for my arcade 1 ups. Definitely a good purchase for the addition
dox1842 –
Excellent setup for the price
I was looking at arcade fight stick options for the pc, most notably the 8bitdo and the mayflash. I happened to have some extra wood laying around and decided to just build my own using this kit. I am definitely not disappointed with the end result.The light up buttons look and feel amazing. The joystick is marked “sanwa” so I don’t know if it is a legit sanwa or a counterfeit (this does come from china Afterall). One thing that is different from the past EG starts kits that I have purchased is that the switches and the buttons are all in one package. That means that once the switch goes bad you have to replace the whole button. It does make the profile smaller though.
Ben C. –
Decent and affordable buttons for a virtual pinball machine
This set of joystick/button/usb controller combination was the perfect set for my budget minded virtual pinball machine. The price for this set was very affordable and the buttons light up and function as they should. Though I’ve used these buttons for everything from coin adding, game start, plunger, nudge and flipper buttons, I might choose to upgrade the flipper buttons in the future for more responsive switch buttons. Overall, the quality is great for the price and the controller board was easy to map using a software such as Joytokey, Antimicro or Xpadder. The responsiveness of the buttons and joystick are acceptable for my likes.
Javier N. Cordoba –
THIS IS NOT A PRO KIT – IF YOU ARE LOOKING A FOR THE BEST OF THE BEST THIS IS NOT YOUR KIT
I came looking for silver and I found gold. THIS IS NOT A PRO KIT – IF YOU ARE LOOKING A FOR THE BEST OF THE BEST THIS IS NOT YOUR KIT. First of all I just buy this product because I only need a few buttons. So finally I decided to build up a complete arcade stick just for fun. I found this pack easy as hell to set it up and configure it. You just need to grab any box you want to put all this stuff in and that’s all, just connect the cables and voila. I did it quick on a old tea box, very broken, just to give it a quick try (see pictures). I heard a lot of negatives things about this package like ” they where not good enough” “usb interface is awfull” , etc, but after I finished to connect everything worked as a charm, even with a pc or the raspberry pi 3. The USB interface works great, and there is no need of an external power supply for the 5v Leds. I have a 1.5amp on my Raspberry and worked perfectly with leds too. So, yes, the stick works amazing but the buttons are not that great. Since I’m going to use it as an spear mame machine it’s fine.
Brewser –
Works great on virtual pinball.
Used them with Visual Pinball, Future Pinball, Popper, and PinballY. Mapping took a little to figure out, some of the software tells you the button number when you press it for learning. Had one bad button in the bunch, but very happy. We beat the heck out of them on some pinball tables when we play. If the video card can handle the resolution, the buttons are zero delay. One note, the provided connection cords are very short for a pinball cabinet. and i spent hours splicing and heat shrinking in new lengths as I couldnt find longer cables to purchase. These also are smaller form factor than the other button types with the separate light extension that you have to daisy chain, so big plus.
STEVEN HUSCH –
Sometimes parts work Sometimes they don’t
Bought it in July the kit is good, the arcade control was the only bad thing in kit it would not go up guessing it has a bad macro switch
Joey & Bonnie –
Buttons stick quickly
Just a few days of work and the buttons are already sticking. That might be fine for personal use, but I am building something for a device that won’t be attended by me. :(This set is a bargain, the lights work great. Everything was easy to setup. The buttons are all the same size, which some of the reviewers are confused about. The white buttons that say COIN and have a human figure can be easily disassembled and the stickers removed.The USB encoder appears as a Joystick when plugged into a PC. As far as I can tell the USB encoder can’t be programmed to send different keystrokes than the joystick buttons. So I use “Auto Hot Key” to essentially bind the joystick buttons to keyboard strokes.
Patrick M. –
Worked perfectly for my Arcade1Up mod
I’ve used plenty of other brands and sticks for other mods, and some of the more name brand joysticks have definitely felt a little tighter. This is closer to the “borderline floppy” tension of the original Arcade1Up sticks than I would have liked, but I bought cheap ones to do a cheap build. For what it is, I can’t complain much and the system plays very well regardless. If you want an “arcade quality” higher end feeling build, there are likely better options, so just be sure your expectations align with the price point and you’ll be happy! All buttons, their LEDs, etc have performed flawlessly and are a breeze to hook to.
Amazon Customer –
Wow, these are the brightest lights I’ve ever used on an arcade cabinet. Not the best quality buttons but exactly what you expect for the price. It all works fine.
Sam SS –
found out the buttons will only light up in a different configuration to actual guide, had to check YouTube video for same and video was wrong but look at the comments about the wiring to find the right way to install cables. White buttons received are also smaller than the others with no sticker like other comments, yeah they mentioned u might get version 1 or 2. Stick screws also way to short had to removed the metal plate to install without it. Pain in butt to have to take it all apart for return.
PsK –
made an arcade joystick for my son, works flawlessly, lights are very cool feature especially in a dark room.easy to install everything, works really good with raspberry pi.
Neil –
I received the “new” version, which went together quick and easy. Slapped it into an old box in about an hour, and it was immediately recognized by my pc. I found one of the buttons wouldn’t press properly, but it disassembled easily and I was able to remove some obvious plastic flash with a hobby knife, whereupon the button was restored to proper working order. Another button simply feels different from the others- “soft” as opposed to “clicky”- but it functioned fine. Lastly, the PCB has a number of 2-pin function ports, purportedly for quickly engaging turbo-fire and clear functions. The kit, however, does not come with any 3-pin (button) to 2-pin (PCB) cables, or any 2-pin cables for that matter, so these ports are not usable out of the box.Altogether a really fun and cost-effective kit for assembling your first arcade stick. Cardboard is surprisingly workable, but I look forward to building a proper enclosure for these parts out of MDF and acrylic (no way am I paying for a prefab arcade stick box).
MB –
It’s just the pieces, and you need to put it into a box of some sort. Works great with PC/Samsung A5/ Raspberry pi. Lots of fun.