Poe Extender, 1 in 4 Out PoE+ Repeater, 10/100Mbps, Extends 250m, 60W Comply with IEEE802.3af/at for PoE Switch/Injector and Security POE Camera Over Cat5/6 Cable
$18.98
Available in stock
Description
Price: $18.98
(as of Aug 09, 2024 23:46:52 UTC – Details)
Product Description
STEAMEMO PoE Extender
With STEAMEMO Waterproof PoE-extender, you can easily improve the range and placement of your wireless and surveillance networks and therefore the strength of your networks. PD-POE-Extender is a cost-effective way to extend the Ethernet network range beyond 100m, the PoE-extender will deliver both data and power to network devices up to 250m while complying with IEEE PoE and data standards. The PoE-extender has both a PD and a PSE chip inside so both the power and the data may be reliably transmitted beyond 100m. The extender acts as a pass-through with data-repeating capabilities. It can be cascaded to reach up to 350m from the closest datacenter or network closet so you can easily install WLAN APs, IP cameras and access controllers where you need them.
No power supply design
Not Require any Additional Power Supply and the Connected PDs is Fed by an Single PoE Switch or Mid-Span, Which Simplifies Installatio PoE Extender and your network cabling, only one cable from in the house to the switch and four poe cameras powered.
Extend Mode
Extension of Power and Data – Up to 250 meters (820 feet). Extend mode increases the maximum transmission distance from 100 meters to 250 meters transmission distance at 10Mbps data speedon all 4 PoE ports.
IEEE802.3at/802.3af Compliant
STEAMEMO Waterproof PoE Extender, Plug and Play. 12.36 or 45. 78 Powered Support, Support IEEE802.3af & at the Power Supply, PoE Total Power Can Reach 30w (PoE Switch or PoE Injector Need to Provide IEEE802.3at (30W) Power)
4 Channel PoE extender: STEAMEMO PoE extender extends power and data to four PoE devices through an exterior network data cable. Delivers the correct wattage to power your PoE devices through auto-sensing(Please note: only support 48V active POE devices, not support passive POE devices)
Extend Mode: When the extension mode is on, the extender will be extended from 100M distance to 250M at the speed of 10Mbps.More convenient for your using.(Better to use CAT5 cable or more)
Extend Network 500M: One network cable connects two surveillance cameras. Single uplink port poe input, only 3/4 ports of poe extender are available. Support up to 30 watts PoE power ouput. The poe power source equipment provide 250m, PoE Booster can extend additional 250m for PoE network. For a total PoE network extension of 500m (1,640 ft)
Extend Network 350M: One network cable to connect four cameras. dual-port uplink port input (Please note: you need to use our POE combiner for adaptation, which is included in the package). Support connection up to two PoE power source equipment. POE Extender 1/2/3/4 Port Available. Support up to 60 watts PoE power ouput. The poe power source equipment provide 150m, PoE Booster can extend additional 250m for PoE network. For a total PoE network extension of 350m (1,148 ft)
PoE Powered: STEAMEMO PoE Extender features one 100Mbps PoE input port and four 10/100Mbps PoE output port. Comply with IEEE802.3at and IEEE802.3af. Plug and play, no additional power supply required. No external power required. Pin Assignment Input: 1/2, 3/6, Output: 1/2 (-), 3/6 (+)
Widely Use: The extender features a convenient wall mountable design for installation flexibility, Durable Metal Housing. STEAMEMO PoE Repeater with design of 4KV lightning protection can be used in outdoor harsh environment -40℃~+70℃(-40°F to 158°F). Ideal for small installations of Security Camera CCTV Surveillance, greatly extending the network signal transmission as well as power supplying distance
After-sales service: Electronic products will have various unexplained failures. We provide one-year after-sales service for renewal. Within 1 year from the order, only replacement is not repaired
Dale M –
10/100 5 port POE extender
The “Poe Extender, 1 in 4 Out PoE+ Repeater, 10/100Mbps, Extends 250m, 60W ” works great for my POE cameras and Wifi access points. As each only requires less than 100 meg of band width this performs properly without any slowing of network traffic. One thing to note is that as the current draw of access points and the cameras required more amps than the single port on the POE switch that was supplying power to this device I had to use the supplied Y cable, Using the 2 male RG45 connectors It plugs into – 2 separate ports on the main switch. The second plug on the Y is just supplying additional amperage to the 5 port extender, and it works perfectly. ( I wasn’t able to get the 4th port on the extender to power 1 of the access points… and then I remembered there was a Y cable in the box. Once I connected it is I described the 4th power then powered the access point). So I am satisfied with the device and it allowed my cameras and access points to be placed over 130 feet away from the house where there is no way to AC power outlets. Hope this helps others understand what the Y cable is for too.
CDubb –
Amazing
Used this product to install pole mounted Poe cameras. Worked like a charm.
WardnTX –
Won’t operate 3 POE cameras, much less 4.
I only needed this for 3 cameras and got it for a back up of my other POE extender in case it gets demaged like the one that apparently was not snapped in all the way and fell out during a thunderstorm and got soaked.I am sure this one is for outdoor as it has the same design. This one was $4 cheaper but only 10/100. Maybe that is the problem. I have a 25x PTZ and 2 mini cams in owl boxes. It would run on owl box and the PTZ but not all three.Boxed it up and shipping it back. I also have a powered Extender feeding this one. So it should have plenty of power. I will spend the extra 4 bucks and get the other one.
Highlander –
Great value
This item wound up replacing a more expensive device, after a lightning strike. Works great. Small and sturdy. Great value for the cost.
CEO –
Returned Item not refunded
I returned my item, at around the same time I closed my bank account; the item costs a good amount of money: it says I got the money but I never did, either something is wrong with Amazon or the return process on STEAMEMO’s end.
NW –
Does not work with Mikrotik POE switches
I have several POE+ Mikrotik routers and this does not work with them. It will power up with the POE but will not connect on ethernet. I have tried forcing 10/100 full/half duplex with no success. I have other brands like this POE splitter, and they are fine. I thought maybe it was defective until I plugged it into a spare Netgear POE switch I have. Works just fine there. Unfortunately, past the 30 day return policy.
ZekeP –
Requires 2 PoE ports from network switch
I believe the listing fails to mention that this device comes with an adapter that takes 1 network port and converts it in to two, which means 2 PoE ports from a switch are required for all 4 output ports to work.Based on the info on the listing, I thought 1 Port from my network switch would lead to 4 PoE ports here, with a total of 30 watts – that is not the case. However, 2 ports from my network switch, using the provided adapter, allow all 4 output ports to function.
josue –
No work
No work any time donât waste your money
D Kutan –
I used it to carry 60W (2x 30w POE+) over one cable from my POE router to this 4 port POE extender so I can run 4x POE cameras off of it. So far Iâve tested it with one camera, everything seems to be working. Noticed if you enable EXTEND mode (that lets you use cables up to 250m), transmission speed of each port drops to 10Mbps (10M/s). Otherwise (EXTEND OFF/Default) they are 100Mbps (half duplex).