4PCS Joysticks for Sony PlayStation 5 PS5 Joystick Replacement Hall Effect 3D Analog Stick Sensor Wheel Thumbsticks for PS5 Joystick Module Controller Accessories Parts (Yellow)
$12.99
Available in stock
Description
Price: $12.99
(as of Sep 28, 2024 13:36:00 UTC – Details)
Product Description
1 Haff Effect Joystick 2 Accurate Design 3 Detai Parts 4 Reality Display
Step of Installation
Step 1
Please remove the middle cover of the controller edge.
Step of Installation
Step 2
Using opening tools to insert in the cover corner of the controller to release.
Step of Installation
Step3
Please Remove the controller screw of L1 and R1.
Step of Installation
Step 4
Remove the rear cover of controller
Step of Installation
Step 5
Please disconnect the battery cable and remove battery.
Step of Installation
Step 6
Remove the microphone ribbon cable and disconnect it from the motherboard.
Step of Installation
Step 7
Remove the battery bracket out of the motherboard.
Step of Installation
Step 8
Disconnect the left and right trigger cable; Disconnect the upper microphone cable.
Step of Installation
Step 9
Carefully remove the joysticks through the front cover and lift the motherboard out.
Step of Installation
Step 10
Remove the joystick cap
Step of Installation
Step 11
Install the new joystick to the controller
Compatible Model: The 3D Joysticks is for Sony Playstation 5 PS5 joystick replacement. Our PS5 joystick replacement’s type is Hall Effect joystick, it only suits for the controller of PS5 Dualsense. Please confirm your model before placing the order.
Wide Application: The replacement for PS5 Joystick are apply to the problem of the drifting, blind spots, dead spots, can’t center, damaged or broken, long time to use, not sensitive, etc. The Joystick for Playstation 5 will better to solve the problem of drifting.
Quality Guaranteed: The PS5 joystick replacement was test before shipment and the PS5 joystick replacement are made of good quality, metal+ABS plastic material make it use more accurately and has longer working life. The controller will use as a new one after replacing the PS5 joystick.
Advantage of PS5 Hall Joystick: The ALPS joystick after using long time, it will has some problem:Electrical parts will wear out due to physical properties,resistance will increase and delay to operate. Our Hall Effect joystick for PS5 using the principle of the Hall effect and magnetic field induction, the accuracy is usually higher and can provide more accurate position detection. The PS5 Hall joystick has a longer life and is suitable for long-term use.
Installation Suggestion: After the joystick is installed, it may not be exactly centered with the your handle motherboard, and calibration is required to center it. Currently, the joystick can be calibrated to the center by adjusting the brush angle or adding an adjustable resistor.In mostly, the joystick offset within 5% is almost imperceptible. Generally, it will only cause a slight rotation of the perspective or automatic walking when it reaches more than 8%, so if the joystick is calibrated to 2% – 3%, it is normal to use.
Charlie45 –
Funcionaron correctamente
…
Jason K.W –
L-4C (red) halls.
These are one of the more recent versions of the hall joysticks and they have very low jitter. I used a different kit that included the same sensors to upgrade my standard PS5 controller with bad drift and it’s worked well.I did need to use the DualShock Calibration GUI and the Gamepad Tester websites (do web searches; I don’t think Amz allows direct offsite links) and was able to get good coverage.I know there’s an even newer version of the hall sensors that work even better with the calibration suite, but it’ll probably take a little bit before they are easy to find.