Acrylic Panel and Case Joystick DIY Set Kits Replacement for Arcade Game Machine Cabinet Controller DIY Kit
$25.99
Available in stock
Description
Price: $25.99
(as of Oct 06, 2024 11:16:20 UTC – Details)
Acrylic Panel: Colors: Black
Material: Acrylic
Thickness: 5mm/0.20inch
Button hole diameter: 30 mm/1.18inch
Size: 30 x 20cm/11.81 x 7.87inch
Acrylic surface protective film, please tear up before installation
Case:
Colors: Black
Material: ABS
Size: 26 x 15 x 4.5cm/10.24 x 5.91 x 1.79inch
Weight: 570g
Package Includes:
1 x Acrylic Panel
1 x Case
8 x Screws
4 x Suckers
Note:
1. This package is DIY parts, not assembled.
2.Only acrylic panel and case. This package doesn’t contain the joystick, buttons, cables.
PC Support: PC desktop , laptop XP, W7, W8 W10 system perfect support.
26 x 15 x 4.5cm/10.24 x 5.91 x 1.79inch: Depth is 4.5cm/1.79″. Some buttons with switches may not fit well, better fit with buckle buttons.
8 Holes: All holes are 30mm. 6 holes from A to F, 2 holes for Credit / Coin and Start.
Plastic Base box and Acrylic Panel. Hard and Strong, with Screws Prepared, Arcade Console DIY box.
What you get: 1* Arcade Box(base and panel), 8* Screws set.
Customers say
Customers like the value for money, build quality, and functionality of the preloaded electronic game. They mention it’s a great little project box, works perfect for their needs, and is easy to assemble. However, some customers have reported that the button holes are smaller for the start and select buttons. Opinions are mixed on the room.
AI-generated from the text of customer reviews
Johnnie –
Nice diy gamepad
Its made better then expected and really like this case the suction cups work extremely well my only negative thing is it collects fingerprints way to easily but easily solved with a graphics decal definitely planning on getting another one. Great buy
Allen Dressel –
It’s cheap, but works
It’s cheap, and it’s solidly built. Can’t really complain. The three top holes are not 30 mm but rather 24 mm. If you don’t have 24 mm buttons, you’ll have to make some modifications. I used a 1 1/8th Forstner bit and increased the hole sizes to accommodate 30 mm buttons. Additionally, the text and outline around the Start button hole flake right off. So, if that matters to you, be warned it’s not going to remain.
Jaime F. Munera –
Perfect fit
I had built a cabinet and it became hard to move and work with… These replaced that and I just need to connect the two controllers to the RetroPie I was using before… it is not the same but it was a great approach to keeping everything neat without sacrificing the arcade experience.
Mykewl –
Arcade style fighting joystick case
Great little project box. Saved me a significant amount of time. Built a Dreamcast arcade fighting joystick. Plenty of room in the boy for the controller and the rumble pack.
Doctor Jest –
Misses the mark by a few feet…
Back a few years ago, these off-brand plastic housings were adequate, and more importantly, they came with the requisite hardware to assemble properly. The quality has taken a HUGE hit and quite frankly, this is garbage. It doesn’t come with proper screws to mount the top to the base. For some reason they do not fit through the base holes. The holes seem smaller in the plastic base than the top and the screws are not self-tapping, so the diameter is important.Something to keep in mind when ordering these types of cases. If I had more skill i suppose I could make my own, but these do save time, provided you get the right hardware. 🙂
zitron16 –
Takes me back
This takes me back at the arcade. It’s easy to assemble and it works on my retropie and raspberry pi. I use it a lot
Saber –
Button holes are drilled incorrectly
The board seems to be strong while holding it, the only problem is that the two buttons are drilled in the bottom instead of the top as shown in the product description. Tried to flip and use but the back side is jagged and the lines that were drawn for measurements are visible.
Chad –
Great overall buy
Only 2 annoyances. 1st is that the main holes are 30mm while most button kits appear to be 28mm (at least the ones I found and purchased). This was a small deal that was easily remedied with a few 1mm width 30mm diameter rubber o-rings. 2nd bigger annoyance is the difficulty in finding 24mm buttons for the 3 top holes. I had to buy a large drillbit to drill the Start hole wider to use with my kit, and I currently have 2 unused 24mm button holes. Other than this, kit is great.
Scorchio70 –
Good build quality, very nice product
Leen –
Pour le prix, bien fini et costaud.
Eric prud’homme –
Awsome
Fabrizio Branca –
Veramente un buon prodotto. Leggero,robusto e a un prezzo più che equo. Una soluzione semplice,pratica ed economica per chiunque voglia dilettarsi nella fabbricazione di un arcade stick. Consigliato.
Jose –
Relación calidad precio, correcto. Las 8 perforaciones son para botones de 30mm.