REVODATA Gigabit Micro USB PoE Splitter 5V/3A, 48V PoE to Micro USB 5V/3A Output, 10/100/1000Mbps Active IEEE802.3af/at, PoE Adapter Splitter for Pi 3B/3B+/Micro USB Device (USB0503G)
$14.09
Available in stock
Description
Price: $14.09
(as of Aug 26, 2024 05:13:51 UTC – Details)
Product Description
PoE Splitter, the best way to expand you smart home device, simple and cost saving.
Easy to add new device, get rid of cluttered wiring.
With more new devices added, it becomes difficult to manage the wiring. You have to install a lot of independent power adapter to power supply the Non-PoE device. But by using our PoE splitter, you will no longer need to worry about the trouble installation and cost.
The PoE splitter is powered from PoE switch, and it will break the PoE power into power(via power cable) and data(via RJ45 cable), then those Non-PoE device can use it just as PoE device. Only need a network RJ45 cable, can right to the install place, no extra power adaapter ever needed!
POE Splitter
PoE installation is very simple, low cost, not need of extra power adapter, with a lot of advantage but it is just for PoE device. But with the help of our splitter, Non-PoE device can work just as PoE device. And You can easily expand as much device as you want.
Better experience provide by Gigabit PoE splitter
Various port are available for you to choose
DC 5.5*2.1mm port mostly can be used for IP camera, wireless AP, and other device with DC port.
DC 5.5*2.5mm port also support DC 5.5*2.1mm port device, it is more flexible.
Micro USB port can be used for Raspberry Pi 3B and device powered from Micro USB port.
Type-C port, also known as USB-C, can be used for Raspberry Pi 4B and new device powered from Type-C port.
Plug & Play
Our PoE splitter is plug and play design, all you need is directly connect it to your device, and it will work immediately. Very easy to use and no configuration required.
1000Mbps
Most PoE splitter in the market is 100 mbps, sometimes may cause delay. But our PoE splitter is gigabit 1000Mbps, which is 125 MB per seconds, 10 times faster. You will no longer suffer from High Latency| Lagging| Lost Packets, gives you a better experience.
Safe & Stable
Built in advanced chip, offer multiple protection to protect terminal device. Over current, short circuit, over voltage, over power protection.
Wide Applications
Wide range of applications, work with IP camera for family safety, work with new samrt home device for convenience, work with AP for business.
Comply with IEEE802.3af/at standard
Comply with IEEE802.3af/at standard, auto detect then output proper power for device. Friendly for new beginner.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars
1,316
4.4 out of 5 stars
1,316
4.4 out of 5 stars
1,316
4.4 out of 5 stars
1,316
4.4 out of 5 stars
1,316
4.4 out of 5 stars
1,316
Price
$13.39$13.39 $13.59$13.59 $11.69$11.69 $11.69$11.69 $14.09$14.09 $14.09$14.09
Standard
IEEE802.3 af/at IEEE802.3 af/at IEEE802.3 af IEEE802.3 af IEEE802.3 af/at IEEE802.3 af/at
Power
Input 48V DC /0.6A, Output 12V/2A Input 48V DC /0.6A, Output 12V/2A Input 48V DC /0.35A, Output 5V/2.4A Input 48V DC /0.35A, Output 5V/2.4A Input 48V DC /0.6A, Output 5V/3A Input 48V DC /0.6A, Output 5V/3A
Gigabit
✓
✓
✓
✓
✓
✓
Interface Type
5.5*2.1mm DC 5.5×2.5mm DC Micro USB TYPE-C Micro USB TYPE-C
Raspberry Pi 3B
✓
✓
Raspberry Pi 4B
✓
Quick question and answer to help you to know our product better
Question: How do I know if this product work with me?Answer: If your place or office has PoE power like PoE switch, and you’re looking for alternative power output for your Non-PoE device because you don’t want to install extra power adapter. Then our PoE splitter is work with you, it can received PoE power, and break it into DC power and Ethernet via 2 cable for your Non-PoE device.—————————————————————————-Question: Why the voltage of the PoE splitter is unstable when I test it?Answer: If Poe splitter is not connect to terminal device, means there is no load. It will trigger light load protection, and voltage will be unstable. The voltage will stable if gives 10mA, which is 0.01A load.—————————————————————————-Question: How do I know whether it work with my device or not?First confirm which power interface, what voltage and what current your device need. For IP camera, you can choose DC 5.5*2.1mm port with 12V voltage, like our PS5712G, PS5712TG, For Type-C device like Raspberry Pi, you can choose Type-C port with 5V voltage, like our TYPEC0502G, TYPEC0503G, For Micro USB device, you can choose Micro USB port with 5V voltage, like our USB0502G, USB0503G.
Support international standard IEEE802.3 af; POE port support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af.
PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection, 1500V high voltage isolation.
5V/3A power output is using Micro USB, the Micro USB port only for power-charging.
POE splitter can separate the power and data via cable transmission. Proper matching use with POE switch or PSE injector which meet standard IEEE802.3af, provides power and data at the same time for the terminal device does not support PoE so that non-PoE devices can be powered over Ethernet.
Customers say
Customers like the performance of the network interface controller adapter. They say it works great and provides power to an iPad. However, some customers have reported issues with connectivity and fit. Opinions are mixed on upload speed, quality, and power.
AI-generated from the text of customer reviews
Kenan –
Works great
Bought this to power my Eufy E330 camera. Works well for my application as my device only draws 5V 2A. I canât speak to the advertised power, but works flawlessly for my use case. I would recommend the device.
Tim –
Pretty great
These are pretty great for taking a None POE security camera and turning it into a POE security camera.
ZFAM –
Pi Zero via PoE
I used this product on my Pi Zero for a GPS stratum 0 NTP server that is housed external to the home and powered via PoE.
Ktga67 –
Does not pass the POE power through the device.
Works well for powering up a 12vdc device from a POE input however I wanted it to pass the POE power through to power up a POE camera and power a small 12vdc device, it cannot do this.
Paul –
POE and 2.5gbps!
I recently updated my main switch to a Unifi 2.5gbps Switch. Having a house with only 1 ethernet port per bedroom, I have to use switches to share the ethernet port. I didn’t want to spend $300+ on switches in every bedroom so I bought a couple of cheap 2.5gbps switches. To reduce the number of power cables, I wanted to use POE and 2.5gbps so I tried these out based on another reviewer and it worked! I can power my cheap 12v 2.5gbps switches via POE AND still am getting 2+gbps per iperf3 from the bedrooms to my main server in the basement. I can’t speak to longevity as I just started using them, but initial experience is great!
J. Smith –
Convenient, cost-effective solution for PoE devices!
I purchased some of these a while back to get rid of wall-adapters in favor if a cleaner PoE powered setup. I’ve been using several of these for years now. I recently had one go out–it wouldn’t maintain 12v but would toggle on and off–but I reached out to the seller (with the expected China time-zone delay) and they were able to address the problem. Great service and I will likely buy more in the future.
J. Roberson –
Works great but you’re not going to get the full speed for long
(update Don’t trust these things. I gave them another chance and got burned again. It just can’t handle 1Gb) I loved this little thing … for a while. Until I realized that it caused some kind of problem and dropped my 1G connection down to 100Mb. I also had strange disconnects which I can only attribute to this thing having issues. I had the device on the same cable and plugged in with a long extension cord before so I know it’s not the device BUT this thing after about 24hrs it starts to have issues. Maybe I have a defective unit and maybe it’s something else, but this one device seems to be the only issue in the line. I’ll have to look around and see if I can find a different device unfortunately as this one was absolutely PERFECT since it has the barrel connect and ethernet cable all in one. Your mileage may vary but be sure to do a burn in test over before the return window expires.
Matt P. –
Using with Inseego FX-2000 Modem
I wanted to have my inseego fx-2000 T-Mobile modem on a UPS, however UPS batteries don’t do well in attics with extreme heat. I got this, hoping it would let me power the inseego via PoE.It works, and I have a proper gigabit link speed.
Chadi –
Ca mâa reglé un problème dâalimentation dâune caméra de surveillance et ca ma sauvé bien dâargent
Bryan taylor –
Used this to pull 5 volts from Poe to power a raspberry pi 4 and it works great, got a couple ordered now to pull 12 volts for a couple of older security cameras
Necati –
Sorry but it doesnt work. I will send it back. I tried without the splitter then the data passes. But when i use it doesnt.
Nico –
It works, but don’t expect anywhere near 1000 Mbps, it maxes out at around 230-240 Mbps between 2 local devices.
Marco –
Hab damit einen Pi 4 seit Jahren am laufen, kein Ausfall!Sehr zuverlässig, keine Hitzeabgabe!Würd ich sofort wieder kaufen und kann jedem empfehlen damit eure Mikrocontrollerzu versorgen 🙂