VONETS VAR11N-300 Portable WiFi Router 2.4GHz WiFi Bridge Wireless Repeater WiFi Hotspot to Ethernet WAN/LAN 2 RJ45 Ports(10/100Mbps) DC/USB Powered for Hotel IP Printer Network Devices
$25.98 Save:$4.00(13%)
Available in stock
Description
Price: $29.99 - $25.98
(as of Jul 07, 2024 00:30:04 UTC – Details)
Product Description
1.2.4GHz Mini WiFi Router WiFi bridge WiFi repeater Portable WiFi Hotspot Wireless Ethernet Bridge (small size); Can achieve WiFi to Wired or Wired to WiFi function(Ethernet to WiFi,WiFi to Ethernet Adapter) ,three-in-one.Support WiFi WAN in router mode;PPPoE, Dynamatic IP, Static IP, L2TP, PPTP; DDNS Client;
2.Support 802.11b/g/n WiFi transfer protocol, WiFi rate :300Mbps
3.WiFi security:WiFi MAC address filter,WiFi Security function exchange, 64/128/WEP encryption
WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism;
3.Support Multi-SSID bridging allowing Multiple VLANs to be supported;
4.Dedicated designed parallel DC power outlet /DC power cable and USB port with Ethernet cable two in one cable connector, it is convenient to share power supply with other devices,reduce redundant connector, convenient for usage;
5.Good compatibility, almost compatable with all of the smartphone, tablet computer, notebook, netbook and WiFi devices.
6.Good Partner for hotel WiFi, home WiFi, Medical devices, Network Printer, IP devices and more network application,easy to set up.
2.4GHz Mini WiFi Router/Bridge/Repeater
VAR11N-300 is a plug-and-play Mini WiFi router and WiFi bridge. On business trips and traveling stay at the hotel, you connect the Ethernet cable in the hotel room to the Ethernet port of VAR11N-300, then connect the power supply, the whole room is WiFi coverage. Now, you can take out your mobile phone, PAD, and other devices that support Wi-Fi, then get WiFi internet anywhere in the room, without any settings.
LED Status instruction:
Ethernet port status Light (Green Light);
Ethernet cable status Light (Green Light);
Hotspot Connection Status Light (Blue Light);
WiFi status Light (Blue Light).
Specification:
1. Support connecting more than 20pcs WiFi terminal at the same time; WiFi hotspot memory, maximum memory up to 100 hotspots.
2. Support wide voltage DC5V-15V(Typical 5V/1A, ripple less than 100mV).
3. Interface: 1 10/100M adaptive Ethernet female port; dedicated two in one power supply cable, with a set of power supply and a set of 10/100M adaptive Ethernet cable ;
4. Ethernet cable and Ethernet LAN/WAN interchangeable
5. Reset button: Long press 5 seconds then release(During operation, the product can not be powered down, otherwise it may cause damage to the product.)
6. Antenna: Built-in Intelligent Omnidirectional antenna
Package:
1*VAR11N-300 1*User Manual 1*Retail box
Support WiFi router mode and WiFi smart bridge mode;
(1)In WiFi smart bridge mode, it can smart control the device WiFi mode;
(2)WiFi AP Client (WiFi client):it can be used for access from WiFi to wired Ethernet,suitable for IP TV, STBs;
(3)WiFi Hotspot (AP Station mode) :it is suitable for hotel room usage;
4)WiFi Repeater (WiFi signal repeat):it can extend the distance of WiFi signal coverage, WiFi transfer;
WiFi router mode:WAN port connection type support: WiFi WAN (up link)
【Industrial WiFi Bridge/Router/Repeater】2.4GHz mini wifi bridge, using three-in-one technology: professional wifi router, wifi bridge, wifi repeater, it can also act as a portable WiFi hotspot. Can achieve WiFi to Wired or Wired to WiFi function(Ethernet to WiFi, WiFi to Ethernet Adapter); Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
【Support Two WiFi Working Modes】(1)WiFi smart bridge mode: ① It can smart control the device WiFi mode; ②WiFi AP Client (WiFi client): it can be used for access from WiFi to wired Ethernet, suitable for IP TV, STBs; ③WiFi Hotspot (AP Station mode): it is suitable for hotel room usage; ④WiFi Repeater (WiFi signal repeat): it can extend the distance of WiFi signal coverage, WiFi transfer; (2)WiFi router mode: WAN port connection type support: WiFi WAN (uplink).
【Point-to-Point Transmission Distance】Maximum can be up to 50 meters when without obstacles and small data, WiFi Tx Power:14.5dBm, 2 X 1.5dBi built-in antennas; Good Partner for PLC, robot, hotel WiFi, home WiFi, Medical devices, Network Printer, IP devices, electronic scale, monitoring application, video or data transfer, and more network applications, easy to set up.
【Product Configuration and Parameters】Powered by wide voltage DC5V-15V(Typical 5V/1A, ripple less than 100mV); DC/USB optional powered mode(two types of power supply can’t be used at the same time), one 30cm power cable with 1 male DC port and 1 male USB port, one female DC port of the parallel connection; 1 WAN 1 LAN RJ45 10/100Mbps adaptive Ethernet ports.
【Function and Technical Application】Support WiFi memory hotspots (Up to 100) automatic matching connection function realize to WiFi motion applications. Adopt the original creation D/A temperature compensated auto frequency control technology (TAFC), make sure the lasting stability to ensure that the WiFi signal is not dropped.
Customers say
Customers like the value, performance, and compactness of the networking router. For example, they mention it’s very well worth the price, works well as a bridge, and is compact. That said, some complain about the documentation, connectivity, and ease of setup. Opinions are mixed on speed, sturdiness, and easy of setup, too.
AI-generated from the text of customer reviews
ES –
Nice WiFi Bridge for Ethernet-Only Gadgets
I ordered this to use with my SolarEdge inverter. The North America models don’t come with WiFi, so when it was installed, it got a cellular modem for monitoring. The cellular connection was spotty, since I live in a rural area, and it had only one bar of service at best.SolarEdge sells a “Wifi Gateway” for $300+, but since it has an Ethernet jack and a USB port, I thought that I’d give this a try.I set it up on my computer in WiFi Bridge mode and made sure it was working. The network speed on this isn’t that high, but it’s more than enough to handle the inverter monitor data. I installed it inside the inverter, and since it’s so small, it was easy to find a permanent space for it.It’s been working perfectly, and now my solar monitoring is stable and updates more frequently. This was a LOT cheaper than going with the OEM route, and I’m guessing that works just as well – if not better.I have had other travel routers like this one before, but I really like that the cables are permanently attached. I guess it wouldn’t be great if you wanted longer cables, but for what I’m using it for, the short length is perfect.Don’t expect this to perform as well as a full-size router or WiFi bridge. It’s a tiny, low-power device, so expect it to perform accordingly.
F. –
Wifi for Older Mac ( ex: Power Macintosh G4)
The absolute easiest way to connect an older Mac like Powermac G4 ( USB needed for power ) to the network / internet through an ethernet port. No messing with incompatibility , lack of drivers etc ! Management through the browser and boom –> Old Mac connected to the net 🙂 Very fait price, extremely good size and it works as advertised 🙂
Phil –
Works great
Used this to add wifi to an OG Xbox. Setup was a little confusing and I had to guess the default password, but it wasnât overtly complicated. No issues after the initial setup. 🙂 Would definitely recommend.UPDATE: Default password is printed on the label on the adapter itself.Has started to heat up really bad under normal use and requires a power cycle every time I try to use the Xbox to connect to the network. Still working about 90% of the time.UPDATE 2: Constantly overheating and disconnecting from network. Have to reboot it every five minutes by disconnecting from power. Went from decent device to completely useless very quickly.
Timothy D. –
Works Great – but has a backdoor.
NOTE: I had to remove all links from this review as I forgot URLs were not allowed – this means you’ll have to do some googling to get the firmware and files.Device technically works perfect – and I would recommend it (it worked flawlessly for our needs and I have purchased a dozen with more on the way).However, the built in firmware does contain a backdoor user/pass that is a super admin account.SuperLogin=vonetsSuperPassword=vonets26642519As a result – I would NOT use the factory firmware. Luckily OpenWRT does support the device – and with help from their GitHub comments – this is how you correct this issue. (NOTE: do this at your own risk – it fixes it, but it is flashing the device and certainly isn’t warranted by Vonets)Download -Google OpenWRT and you will get to the openwrt page – you can search for vonets in the supported hardware and find the download file.Download the firmware and rename the long *.bin file to fw.bin (makes it easier in the future).Download a TFTP server, you’ll have google “tftp server” – I used one by jounin.Plug in the VONETS device to your USB and Network to bring it online.Go to the IP: 192.168.253.254 in your browser and login with the superuser login aboveOn the Status page you will see SYSTEM UPTIME and the actual UPTIMEClick SYSTEM UPTIME then the UPTIME time until you get a prompt that says “ATED START” – this hidden trigger enables the telnet client on the device.Telnet to the device, and use the username and password of admin | adminBack on your computer – start the TFTP client and set it to bind to your vonets ethernet port (lets say it is 192.168.253.100)Click BROWSE on the directory and make sure you put the fw.bin file you saved earlier in that directory.Back on the telnet session – type “tftp server: tftp -l fw.bin -r fw.bin -g 192.168.253.100″Press ENTER to load the firmware on the deviceThen write the firmware by typing “mtd_write write fw.bin /dev/mtd4″After it is done writing type “reboot”Upon rebooting, you will be part of the new subnet 192.168.1.* with 192.186.1.1 as the gateway/management IP.Login (no password by default) and you are now in with OpenWRT firmware.The built in Ethernet cable is the LAN, the port on the device is the WAN, and the AP is set to OpenWRT with a bridge to the LAN by default – you can change all of this and more – see openwrt for documentation.Enjoy!
Noob_allday –
Lights are TOO BRIGHT!
This is relatively easy to setup. Lights are way too bright though. I’m debating wrapping this in electrical tape. I was hoping it would be easily hidden behind a monitor or desktop but it’s so bright you see it across the room. It’s also kind of a pain to change networks after you already set one up. I recommend just resetting the device and starting from scratch if you need to setup a second network or change the original network settings.
Huot Iv –
We are using this to get IP connection on a deskphone and I was not sure if it would work but it just took a minute to setup as a bridge and disable the dhcp and hotspot and it works perfectly. It saved us a lot of money not having to run a cable to this location
Sinharib Shlimon –
Great service came on time I installed and it’s been working just fine
RONALD G STOLAR –
works well
Melissa –
Gives you internet where ever you want!! Recommend highly works great no problems
Rutvik Monpara –
Its a small range wifi repeater without lan and router with lan very small range and very less speed